TILE BOND FL
THIN SET MORTAR/PLASTER FOR ANTI SKID TILE FIXING
TILEBOND-FL is a waterproof thick/thin bed material made from
cement, finest aggregates and the best quality additives. Specially
formulated to bond a variety of tiles onto rigid substrate.The use of
TILEBOND-FL would ensure an excellent bonding for your tiling
or cladding job.
PRODUCT BENEFITS
- Soaking of tiles is not essentially needed. Tiles direct from box can be fixed on desired surface, minimizing possible breakage & labor cost on soaking.
- Wetting of surface to be tiled is not necessary as TILEBONDFL works perfect on clean & dry surface. However, washing a surface to clean & remove loose particles etc. is recommended 30 min. prior to tile fixing.
- Curing is not required as TILEBOND-FL is self curing.
- Hacking or roughening of surface to be tiled is not necessary.
- TILEBOND-FL waterproofs the entire surface applied upon.
MIXING
Add TILEBOND-FL to a bucket containing clean water, mixing uniformly/ constantly to
achieve the required thick creamy consistency. The mixing Ratio is 20 kg of
TILEBOND-FL approximately 4.4 to 5.2 liters of water. Allow the mixed creamy paste to
stand for 5-10 minutes, remix and it is ready for use
PACKAGING
